Control Arms

Order Desk- (519) 978-3537
Tech Line- (248) 200-8818

Mopar A, B and E body control arms are sold as "Ready to Bolt On" set. These arms are designed with a 3 degree caster built in with up to 7 degrees through the adjustable Stainless steel ends with Urethane bushings. The arms are JIG built and JIG welded for a repeatable and accurate end product. Each set are TIG welded and Stress Relieved. The arm materials are DOM seamless tubing and 4130 Tooling Steel

A body Arms with Stainless Ends- $300
B/E body Arms with Stainless ends- $300
Early A body arms sold without Ball joints- $250
Heim joints and spacers available for an additional $20
Shipping Anywhere in the US -$20 flat rate
Shipping Anywhere in Canada -$25 flat rate
International shipping available- quoted rate +5%

VISA, Master Card, PayPal accepted

Tubular Lower Control Arms

Mopar A, B and E body Lower Control Arms with Sway Br Tabs! They are a direct bolt in on your factory K frame. These arms are JIG machined and JIG welded for repeatable and an accurate product. They are built with 4140 tooling steel and D.O.M. seamless tubing. The arms are TIG welded and provide an 8 pound weight savings of Static weight! These arms are designed for torsion bar cars and bolt right in. TWICE as strong as factory arms and a lot nicer to look at!

Cost- $400 a set